Hall Research VSA-31 - Manual (Page 9)

A / V Switch-Cat TM
9
5.0 Windows™ Projector Configuration Software
Included in the VSA-31 package is a CD with the application that you
need to use to select your projector model in order to upload the
configuration serial parameters. This is a one time task, as long as you do
not change your projector. You can also create your own command string
set as explained below.
. Installing the Software
To install the software, load the CD into your PC and double-click on the
setup.exe file on the CD. The installation wizard will walk you through
the rest of the installation
. Selecting the Com Port
The VSA-31 Programming Software will detect your available COM
ports. Just select the COM port you will use to connect the VSA-31 to
your PC
. Selecting your Projector Configuration file
Select your projector model from the drop down list. If your projector
model is not listed, contact Hall Research Technologies via the Request
button for your projector configuration file. You may also enter the
projector codes in a new configuration file if you would prefer.