Hall Research VHD-HD2CV - Manual (Page 7)

HDMI to Composite Video & Audio Scan Converter
5
3.1 OSD Display of Input and output Status
At any time click (tap) the OSD/SELECT button on the top of the unit
to see the status of the input and output as shown below, the OSD will
disappear after a few seconds:
Figure 3 – Status Indication
3.2 To Quickly Switch output format between NTSC and PAL
While the Status OSD is being displayed, if you click on the
OSD/SELECT button (a second time), the converter’s output will
toggle between NTSC and PAL.
3.3 Advanced Settings
While the Status OSD is being displayed, press and hold the
OSD/SELECT button for 3 seconds to bring up the advanced settings
Manu as shown below.
Figure 4 – Advanced Settings Menu
In the above diagram the dots next to each item indicates current
setting. To change the setting tap the button to cycle through and
highlight the setting you want and wait for OSD to disappear. This
automatically selects the last highlighted position the menu.
• Since many aspect ratio output options are available, to change
the setting, first use the button to highlight the Aspect Ratio line of
the OSD, then tap again to cycle through the following options.
o Full Screen
o Letterbox
o Pan & Scan
o Auto TV 4:3
o Auto TV 16:9