Hall Research VHD-HD2CV - Manual (Page 5)

HDMI to Composite Video & Audio Scan Converter
3
1. Introduction
The VHD-HD2CV is a compact HDMI to composite video & audio
converter. It accepts HDMI or DVI video input up to 1080p and
converts it to composite video. If the input HDMI signal has embedded
audio, it is extracted and output as line level stereo L/R on RCA
connectors.
Underscan presets allow easy capture of the full input video frame.
The converter’s output can be set as either NTSC or PAL, and
features aspect ratio adjustments. The Scan converter features
motion adaptive 3D de-interlacing with noise reduction and motion
adaptive interpolation.
1.1 Features
• Converts and scales digital HDMI or DVI to composite video
• Extracts HDMI audio to analog stereo output
• Output interlaced NTSC or PAL video with overscan and two
underscan output options
• Multiple aspect ratio adjustment options
• Motion adaptive 3D de-interlacing and adaptive interpolation
• Quick and simple to install
• Compact size
2. Setup
2.1 Package Contents
Your package should contain the Scan Converter box, 5v power
supply, and this User’s manual
2.2 Connections
1. Connect input to HDMI or DVI source (cable not included)
2. Connect Composite and Audio RCA outputs to your display
3. Connect 5V power supply to box
Use only regulated 5v DC supply (center positive) as
supplied with the unit. Connecting wrong power
supply will damage the unit and void warranty
PAL/NTSC To quickly Switch between NTSC or PAL output
formats, press the OSD/SELECT button Twice (see
Operation Section 3, for further details