Hall Research 4-to-1KM User Manual
Page 4
- 2 -
• Returns to last selected PC after power off or reset
• Designed and manufactured in the USA
S
S
e
e
t
t
u
u
p
p
1. Use special “Y” input cables (ordered separately) to connect the PCs to the
Switch. The black end connects to the Switch. The purple connector, of the
“Y” cable, plugs into the keyboard port on PC #1 and the green connector
plugs into the mouse port of PC (it is best to turn off all PC’s when you are
hooking them to the 4-to-1).
2. Connect a mouse and a keyboard to the ports of the Switch.
3. Turn the PC’s on
4. The keyboard and mouse may now be treated as a keyboard and mouse
connected directly to the PC that is selected through the unit.
FIGURE 1
“4-to-1”
connector functions and the Y-input cable
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
The keyboard and mouse will function no differently than if the keyboard and
mouse were connected directly to the PC.
Switching
The first way to switch between the PC’s is to simply press the button for the
desired PC on the front panel of the Switch.