Hall Research UVA-8 - Manual (Page 6)

Model UVA-4 and UVA-8
4
2.2 Connection to Compatible Receivers
The UVA-4 and UVA-8 units have single UTP cable connections to any of Hall
Research’s compatible URA receiver product line.
Some compatible receivers are:
PART NUMBER
URA
URA-SKU
URA-XT
URA-232
URA-232-XT
RS232 is Not Functional
Table 2 – Compatible Receivers
‰
Connect the UTP cable from each compatible URA receiver to the “UTP
OUT” connectors of the UVA-4 or UVA-8.
‰
Connect the HD15 - “PC/HDTV IN” connector on the splitter to the video
source. For YPbPr video sources, use a 3-RCA to HD15 cable (Hall
Research P/N CHD15-RGB).
‰
Connect the 3.5mm - “AUDIO IN” connector to the audio source or other
sound equipment.
‰
Connect the included power supply to the 2.5mm – center positive +6 VDC
power input connector on the unit.
‰
Never use any other supply as this may damage the device.
2.3 Cable Requirements
All units can use CAT5/5e/6 or Zero-Skew™ UTP or STP (unshielded or shielded
twisted pair) cables.
2.4 Typical Block Diagram for UVA-4 or UVA-8
Figure 2 – UVA-4 & UVA-8 Application Diagram