Hall Research UVA-8 - Manual (Page 14)

Model UVA-4 and UVA-8
12
5. Specifications
Video
Gain
Unity
Number/signal type 1 analog signal input. Standard VGA output RGBHV, RGBS, RGsB, RsGsBs,
component video (bi-/tri-level sync)
Connectors (4 or 8) female RJ-45 output
(1) HD15 video input
(1) HD15 local video output
Nominal amplitude 1 V p-p for Y of component video
0.7 V p-p for RGB and for Pr and Pb of component video
4.0 V to 5.0 V p-p, for TTL Sync signals of RGBHV, RGBS
Impedance 75 ohms
Maximum resolution Up to 1920x1200 and 1080p dependent on cable length
Sync Polarity
Positive or negative
Audio
Gain
Unbalanced output: 0 dB
Connectors (1) 3.5mm Audio Input
(1) 3.5mm local Audio Output
Frequency response 20 Hz to 20 kHz, ±1 dB
Connector
(1) 3.5 mm connector
Type Monaural, Simulated Stereo
THD + Noise 0.2% @ 1 kHz, 0.3% @ 20 kHz at nominal level
General
Recommended cable Varies by model, Model URA greater than 200 ft should use - Hall Research’s
Zero-skew™ CAT5 cable
Power Supply 100 VAC to 240 VAC, 50-60 Hz, external; 6 VDC regulated
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
Enclosure type Steel
Dimensions 1.66" H x 8.42" W x 2.60" D - Depth excludes connectors
(42.2 mm H x 214 mm W x 66 mm D)
Product weight 1.5 lb (0.68 kg)
Shipping weight 3.0 lbs (1.36 kg) (UVA-4)
4.0 lbs (1.81 kg) (UVA-8)
Vibration ISTA 1A in carton (International Safe Transit Association)
Safety CE
EMI/EMC CE, FCC Class A
MTBF 90,000 hours (Calculated Estimate)
Warranty 2 years parts and labor
Specifications are subject to change without notice