Hall Research UH-1BTX-S - Manual (Page 6)

User’s Manual
2. Installation
2.1 Package Contents
The product is sold either as a kit (containing both a Sender and a Receiver), or each
end can be purchased separately. This user manual is primarily written for the kit, but is
also applicable to each end.
The kit package should contain a Sender (-S), a Receiver (-R), and two power supplies
(one for each end). The power supplies are universal (100~240VAC, 50~60Hz). Model
number 511-3A-161WP05, 5v @ 2.6A with 2.1mm plug.
Figure 1 – Power Supply with international switchable blades
Use only regulated 5v DC supply (center
positive) as supplied with the unit.
2.2 Input and Output Connections
The HDMI Connectors are clearly labeled as INPUT and OUTPUT.
Figure 2 – Front and Rear Panels of Sender / Receiver
 Using a quality HDMI cable, connect the video source to the HDMI connector
labeled INPUT. Hall Research recommends locking HDMI Cables such as
Model C-HDMI-L-length , available in lengths from 1.5 ft to 50 ft
4