Coupon gs1 databar output, Upc-e0, Upc-e0 on/off – GoDEX GS550 User Manual
Page 82: Default all upc-e settings

6 - 24
Coupon GS1 DataBar Output
If you scan coupons that have both UPC and GS1 DataBar codes, you may
wish to scan and output only the data from the GS1 DataBar code. Scan the
GS1 Output On code below to scan and output only the GS1 DataBar code
data. Default = GS1 Output Off.
* GS1 Output Off
UPC-E0
GS1 Output On
UPC-E0 On/Off
Most U.P.C. bar codes lead with the 0 number system. To read these
codes, use the UPC-E0 On selection. If you need to read codes that lead
with the 1 number system, use UPC-E1 (page 6-27). Default = On.
* UPC-E0 On
UPC-E0 Off