Upc-a number system, Upc-a addenda, Upc-a addenda required – GoDEX GS550 User Manual
Page 80

6 - 22
UPC-A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will
not transmit it. Default = On.
* On
UPC-A Addenda
Off
This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
* 2 Digit Addenda Off
5 Digit Addenda On
UPC-A Addenda Required
* 5 Digit Addenda Off
When Required is scanned, the scanner will only read UPC-A bar codes
that have addenda. You must then turn on a 2 or 5 digit addenda listed on
page 6-22. Default = Not Required.
Required
* Not Required