Codabar concatenation – GoDEX GS550 User Manual
Page 62

6 - 4
When Check Character is set to Validate, but
Don’t Transmit, the unit will
only read Codabar bar codes printed with a check character, but will not
transmit the check character with the scanned data.
* No Check Character
Validate Modulo 16, but
Don’t Transmit
Validate Modulo 16
and Transmit
Codabar Concatenation
Codabar supports symbol concatenation. When you enable concatena-
tion, the scanner looks for a Codabar symbol having a
“D” start character,
adjacent to a symbol having a
“D” stop character. In this case the two mes-
sages are concatenated into one with the
“D” characters omitted.
A 1 2 3 4 D D 5 6 7 8 A
Select Require to prevent the scanner from decoding a single
“D” Codabar
symbol without its companion. This selection has no effect on Codabar
symbols without Stop/Start D characters.
On
Require
* Off