Getting started, About this manual, Unpacking your device – GoDEX GS550 User Manual
Page 11: Connecting the device, Connecting with usb

1 - 1
1. Getting Started
About This Manual
This User
’s Guide provides installation and programming instructions for
the Godex GS550 area-imaging scanner. Product specifications, dimensions,
warranty, and customer support information are also included.
Godex bar code scanners are factory programmed for the most common termi-
nal and communications settings. If you need to change these settings, pro-
gramming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking Your Device
After you open the shipping carton containing the product, take the following
steps:
• Check for damage during shipment. Report damage immediately to the
carrier who delivered the carton.
• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.
Connecting the Device
Connecting with USB
A scanner can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the device first, then to the
computer.
2. The scanner beeps.