Section six - appendix, Specifications – DigiTech RP1000 User Manual
Page 54
50
Section Six - Appendix
General Specifications
A/D/A Converter:
24-bit high performance audio
Sampling Frequency:
44.1 kHz
DSP Section:
AudioDNA2™ DSP Processor
Simultaneous Effects:
10
Preset Memory:
100 User Presets (1-00) / 100 Factory Presets (F1-F00)
Dimensions:
19.5˝ Length x 10.75˝ Width x 3.75˝ Height
Unit Weight:
11.5 lbs.
Analog Input Connections
Guitar Input:
Impedance:
1M Ohms
Maximum Input signal:
8 dBu
Stompbox Loop Input:
Impedance:
475K Ohms
Maximum Input signal:
8 dBu
Amp Loop Input
Impedance:
16K Ohms
Maximum Input signal:
8 dBu
Analog Output Connections
Line Outputs
Impedance:
1K Ohms unbalanced / 2K Ohms balanced
Maximum Output level:
8 dBu
XLR Mixer Outputs
Impedance:
2k Ohms balanced
Maximum Output Level:
14 dBu
Stompbox Loop Output
Impedance:
600 Ohms unbalanced / 1.2K Ohms balanced
Maximum Output signal:
8 dBu
Amp Loop Output
Impedance:
600 Ohms unbalanced / 1.2K Ohms balanced
Maximum Output signal:
8 dBu
Headphone Output
Minimum Headphone
Impedance:
50 Ohms
Voltage Rails:
+/-15V
Electronic SNR:
≥ 107dB
USB:
2.0 compliant
Audio streaming:
2 channels to computer, 2 channels from computer
Sample rate:
44.1 kHz 24 bit
External Control Input
Looper Footswitch Input:
for use with optional DigiTech FS3X
Power Requirements:
US and Canada:
120 VAC, 60 Hz Adapter: PS0913B-120
Japan:
100 VAC, 50/60 Hz Adapter: PS0913B -100
Europe:
230 VAC, 50 Hz Adapter: PS0913B -230
UK:
240 VAC, 50 Hz Adapter: PS0913B -240
Specifications