DigiTech RP1000 - Manual (Page 33)

29
Boss ® OC-2 Octaver TM (octaver)
Based on the Boss ® OC-2 Octaver TM , this adds two signals to your original guitar signal. The first
is one octave below your guitar, and the second is two octaves below your guitar. Each additional
signal has its own volume control.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Octave 1- Knob 3 adjusts the the volume of the signal 1 octave below the input signal.
Ranges from 0 to 99.
Octave 2 - Knob 4 controls the volume of the signal 2 octaves below the input signal.
Ranges 0 to 99.
Dry Level - Knob 6 controls the volume of the dry signal. Ranges from 0 to 99.
Delay
Delay is an effect that records a portion of the incoming signal, and then plays it back a short
time later. The recording can repeat just once or several times.
Delay - Knob 1 selects one of the 7 different Delay types. Values include: analog
(DigiTech ® Analog Delay), dm delay (Based on the Boss DM-2 Analog Delay), digital
(DigiTech Digital Delay), modulate (DigiTech Modulated Delay), pingpong (DigiTech Pong
Delay), tape (DigiTech Tape Delay), echoplex (Based on the Maestro TM EP-2 Echoplex ®
Tape Echo), reverse (DigiTech Reverse Delay), lo fi (a Lo Fidelity Delay), and 2 tap (a
2-tap Delay). Press this knob to turn the Delays on and off.
Knobs 2-6 have the following functions for the various Delay Effects:
Delay Knob 2
(Time) Knob 3
(Repeats)
Knob 4
(Param. 1)
Knob 5
(Param. 2)
Knob 6
(Delay
Level)
analog Time Repeats -- Multiplier Delay Level
dm delay Repeat Rate Echo Intensity Multiplier --
digital Time Repeats Ducker
Threshold
Multiplier Delay Level
modulate Time Repeats Depth Multiplier Delay Level
pingpong Time Repeats Ducker
Threshold
Multiplier Delay Level
tape Time Repeats Wow Multiplier Delay Level
echoplex Time Repeats -- Multiplier Volume
reverse
Time Repeats -- Multiplier Delay Mix
LO FI Time Repeats -- Multiplier Volume
2 tap Time Repeats Tap Ratio Multiplier Delay Mix
The Repeats parameter (Knob 3) ranges from 0 to Repeat Hold (Hold) for all delays except
the Echoplex ® , DM-2, and Lo-Fi. Repeat Hold is one click past 99, and acts as an infinite repeat.
The Multiplier parameter (Knob 5) lets you divide the tap tempo rate into 1/2, 1/4, dotted 1/8,
1/8, and triplet 1/4 note rhythms.