Glow-worm Climapro2 RF - Manual (Page 13)

0020094580_01 - 08/10 - Glow-worm - 11 -
HOW TO USE YOUR CLIMAPRO
2
RF
6.8.3 Programming the heating
Temperature setting values (° C)
minimum 5
recommended 20
maximum 30 (adjustable during
installation)
Factory setting:
Monday to Friday
Nº of time
slot
Start End Temp.
1 00:00 06:30 12°
2 06:30 22:00 22°
3 22:00 00:00 12°
Saturday
Nº of time
slot
Start End Temp.
1 00:00 07:30 12°
2 07:30 23:30 22°
3 23:30 00:00 12°
Sunday
Nº of time
slot
Start End Temp.
1 00:00 07:30 12°
2 07:30 23:30 22°
3 23:30 00:00 12°
• Press button > then select on
screen > heating > program > define
> choose a day.
To set an operating time slot:
Programming for a day begins at 00:00 with a
maximum of 7 time intervals over 24 hours.
• Increase or reduce with the
buttons to display the desired ambient
temperature setting and validate with
button .
• Define the end of the time interval with
the buttons and validate with the
button.
• Begin the programming operations
again if you wish to add other time
intervals.
To modify a setting:
• Use the buttons (go back) or
(go forward) to highlight the
setting in question.
• Modify a temperature or a time with
the buttons and validate with the
button.
To delete a time interval:
Deletion is performed:
- time interval by time interval,
- from the last time interval to the first.
• Use the button to highlight the
last time interval that was set.
• Use the button to display .