Glow-worm Climapro2 RF - Manual (Page 10)

0020094580_01 - 08/10 - Glow-worm - 8 -
HOW TO USE YOUR CLIMAPRO
2
RF
6.5.2 Button functions
From the main screen, it is possible to:
Buttons Description
To change the room temperature
if the heating program is
disabled.
To access the override of an
active program.
To access the override menu if
multiple programs are active (see
override menu).
To unlock the keypad by pressing
the button for 3 seconds.
To cancel an override.
To access the cancel override
menu if more than one override
is active (see override menu).
To access the main menu.
6.5.3 Screen on standby
The room thermostat screen goes into
standby when the keyboard is not in use
for 1 minute. The screen displays no
information.
If the lock function is enabled, locking
takes place when the room thermostat is
on standby (see keypad lock).
• Press a key on the keyboard to display
the main screen.
6.6 Override shortcuts
6.6.1 Override menu
This menu appears when multiple
programs are enabled.
• From the main screen, press .
• Select the program to which the
temporary modification will be applied
and press .
6.6.2 Override
This feature allows the temporary
overriding of current programs.
• Settings:
- heating temperature,
- enable or disable for hot water and
cooling.
• Press the button to confirm .
• Set the end time of the temporary
modification with the buttons and
press the button to confirm .