Settings – Glow-worm Clearly Solar Controller User Manual
Page 18

18
There are four steps to setting the times you require.
1. Select the time period for reheating
2. Select a weekday or block of days
3. Set the start time
4. Set the end time.
You can specify up to three time periods. The time periods
cannot overlap each other, see below:
From the main running screen, press
button 5 times.
The programming screen is displayed, the cursor is flashing
beside the reheat (tap) symbol.
Press the
button once. The cursor moves to beside
“H1” which is now flashing. To change the number of time
periods, use the
and
buttons. When adjusted as
required press
button once.
Settings
The cursor marks the block of days display, which also
flashes. Select a block of days or a single day of the week
by repeatedly pressing the
or
buttons.
Press
button once when required block is selected.
The cursor marks the start time and the hour display
flashes. Select the start time by using the
and
buttons. Press the
button when the required hour
is selected.
Diagram 10
Diagram 11
Diagram 12
Diagram 13