DXG Technology DXG-506V - Manual (Page 39)

1. Insert the black end of the AV Out cable into the DV camera’s bottom left Video Out
port.
2. Insert the yellow end of the AV Out cable into the television or projector’s video-in
plug. Insert the white and yellow ends into the television or projector’s audio-in plug.
3. Select the correct channel for the TV.
NOTE:
The output channel differs depending on the brand of the television; please
refer to your TV user’s manual.
System Requirements:
Listed below are the minimum system requirements for the DXG-506V digital video camera.
We recommend that you use a computer system that exceeds the minimum requirements
in order to utilize the video camera to its fullest capacity. The minimum system
requirements for the DXG-506V are as follows:
System Requirement (PC)
Operating System
Microsoft Windows98SE, Me, 2000, XP
Processor Intel Pentium 3 or higher
Memory 32 MB or higher
Optical Drive 4x or higher
Hard Drive 10 MB or higher remaining space
Others One standard USB 1.1 or USB 2.0 port
For Microsoft Windows 98SE and ME users, please insert the larger end of the USB cable
into the PC’s USB port after installing the driver and applications. Insert the smaller end into
the camera’s USB port. When the camera is in Photo/Video Play Mode Option, press the
UP/DOWN button on the 4-way multifunction button to select Web Camera and press the
OK
button. Follow the steps below:
1. Select “My Computer” and right click on the mouse.
2. Choose “Manage”
3. Select “Generic IDE Disk Type47” and choose “Property”. The following appears on
the screen:
38