beautypg.com

DXG Technology DXG-506V User Manual

Page 13

background image

When inserting an optional SD/MMC memory card, follow the icon shown in

the compartment to orient the card. Push the memory card all the way into

the memory card slot to insert. Pushing the card in again gently, will cause it
to pop-out.

After inserting the memory card under normal conditions, the

icon appears

on the screen. If the

icon (built-in memory status) appears after inserting

the memory card, please refer to the following four possible causes and solutions:


Cannot Identify the Data Format on Memory Card

Please backup data to a computer and reformat the memory card.

Memory Card Cannot Make Contact with the Slot due to Contamination

Please clean with a dry, clean soft cloth and then insert it again.

The Memory Card is Defective and Cannot Execute Commands

We recommend that you contact the memory card manufacturer to repair the
memory card.

Memory Card Slot is Defective and Cannot Read Data

Contact the manufacturer to arrange for repairs.

Using the Built-in Memory

This camera comes with 32MB of built-in flash memory (since the interface

program will take away some built-in memory, it is actually less than 32MB)
to act as temporary memory when the memory card is full.

When a memory card is inserted in the camera, all actions such as formatting,

saving, playing, and downloading/uploading pictures wil be directed toward
the memory card.

To use the built-in memory, simply remove thememory card.

1.

This product is compatible with SD or MMC memory cards from
32MB to 2GB.

2.

When the memory is inserted in the wrong direction, it will not go in
completely; to avoid damage do not force the memory card.

3.

If the camera cannot read the memory card, try cleaning the metal
surface with a dry soft cloth and insert again.

4.

Before inserting the memory card, always make sure the memory

card lock is unlocked, otherwise the

icon will appear on the

screen after insertion and you will not be able to take pictures, save
or access any data.

5.

Do not open the SD card cover while shooting to avoid damaging
data.

12