GlowShift 60 PSI Boost Gauge - Manual (Page 2)

Additional Installation Information & Material Requirements

GlowShift Gauges Approved Conductor Wires: Successfully installing GlowShift Gauges may require lengths of wire (sizes
and quantity depend on vehicle, gauge type, gauge location and / or sensor location). For correct and proper GlowShift Gauge
installation and operation, the use of 18 Gauge (wire diameter) automotive grade conductor wire with sheathing is recommended
for one or more gauges per vehicle. When installing and routing wires from the engine compartment, to inside the vehicle cabin,
always employ the use of a rubber grommet. This will prevent and deter the stripping of power supply and / or sensor wires that is
necessary to deliver vital statistics about your engine to your GlowShift engine monitoring instruments. Never use wire nuts to
fasten or bound vehicle / gauge or sensor wiring. Always use securing crimp connectors or solder individual wire junctions
together for optimum gauge installation and operation.

GlowShift Gauges Approved Installation Accessories: GlowShift Gauges may require the installer or user to provide additional
products, accessories or adapters for the correct installation and operation of a gauge or sensor, as per the GlowShift Installation
Instructions. When installing and routing hoses to or from the engine compartment, to inside the vehicle cabin, always employ the
use of a rubber grommet. This will prevent and deter the stretching or pinching of hoses that is necessary to deliver vital statistics
about your engine to your GlowShift engine monitoring instruments.

GlowShift Gauges Installation Instructions: Installation documents are solely to provide a guide for individuals that are
mechanically and electronically able to install products. If you are unsure about the correct procedure of installation for a product
or device, you should consult a licensed professional.