ENMET OX-2000 - Manual (Page 9)

TX2000 / OX2000 ENMET Corporation
5
3.4 Scrolling the Parameters
By pressing momentarily and successively on the BACKLIGHT switch.
Press BACKLIGHT Switch
With first press of switch, display is back-lighted then
Press BACKLIGHT Switch The lowest measurement detected since the instrument was switched on
(refreshed each time the instrument is switched back on)
Cyclic display of measurement appears if no switch is pressed *
Press BACKLIGHT Switch The highest measurement detected since the instrument was switched on
(refreshed each time the instrument is switched back on)
Cyclic display of measurement appears if no switch is pressed *
Press BACKLIGHT Switch
Display of segments indicate operating battery current voltage status
Cyclic display of measurement appears if no switch is pressed *
Press BACKLIGHT Switch
Return to display of the current measurement in ppm of the toxic
measurement detected or in % oxygen
* If no switch is pressed in 3 min., the instrument will return in normal display of current measurement.
LO
HI
| | | |