ENMET OX-2000 - Manual (Page 6)

ENMET Corporation TX2000 / OX2000
2
2.0 Features
2.1 Features
Feature See Figure 1 Description
Display The liquid Crystal display allows messages to be read clearly:
• 3 digits 1/2 for displaying the measurement (0 to 1999 ppm or 0 to 30.0% O2).
• Equipped with back light by light-emitting diodes.
• 4 pictograms supplementing the audio and visual alarms relating to the
exceeding of thresholds, battery faults, maintenance mode.
ENTER Switch • Switching the instrument on or off
• Enter
BACKLIGHT / Down
Switch • Backlighting the display
• Scrolling the parameters and menus
• “down ” switch
ALARM / Up Switch • Turn off the gas alarm
• “up” switch
• "yes" or "no" for confirmation.
Visual Alarm Red indicator clearly visible on 4 sides and located at the top of the instrument
Audio Alarm Loud buzzer located on the front panel of the instrument
Sensor OX2000: Measures oxygen concentration
TX2000: Senses toxic gas
• See Table 3 in section 4.4 for data on different sensors
Belt Clip Clip to outside of clothing for hands-free operation
Figure 1: Exterior View of TX2000 / OX2000
Sensor
(Under protective Cap)
Display
ENTER switch
BACKLIGHT switch
ALARM switch
Belt Clip
(On back of instrument)
Visual Alarm
Audio Alarm
Sensor
Protective Cap