beautypg.com

0 warranty – ENMET SPECTRUM User Manual

Page 17

background image

SPECTRUM Series

ENMET Corporation

13

5.0 WARRANTY

5.0 WARRANTY

5.0 WARRANTY

5.0 WARRANTY

ENMET

warrants new instruments to be free from defects in workmanship and material under normal use for a period

of one year from date of shipment from

ENMET

. The warranty covers both parts and labor excluding instrument

calibration and expendable parts such as calibration gas, filters, batteries, etc... Equipment believed to be defective
should be returned to

ENMET

within the warranty period (transportation prepaid) for inspection. If the evaluation by

ENMET

confirms that the product is defective, it will be repaired or replaced at no charge, within the stated

limitations, and returned prepaid to any location in the United States by the most economical means, e.g. Surface
UPS/FedEx Ground. If an expedient means of transportation is requested during the warranty period, the customer is
responsible for the difference between the most economical means and the expedient mode.

ENMET

shall not be

liable for any loss or damage caused by the improper use of the product. The purchaser indemnifies and saves
harmless the company with respect to any loss or damages that may arise through the use by the purchaser or others of
this equipment.

This warranty is expressly given in lieu of all other warranties, either expressed or implied, including that of
merchantability, and all other obligations or liabilities of

ENMET

which may arise in connection with this equipment.

ENMET

neither assumes nor authorizes any representative or other person to assume for it any obligation or liability

other than that which is set forth herein.

N

OTE

:

When returning an instrument to the factory for service:

Be sure to include paperwork.

A purchase order, return address and telephone number will assist in the expedient repair and return of your unit.

Include any specific instructions.

For warranty service, include date of purchase

If you require an estimate, please contact

ENMET

Corporation.

There is Return for Repair Instructions and Form on the last pages of this manual. This form can be copied or used as
needed.