ENMET RECON-4 - Manual (Page 6)

4
After downloading all the data logs and event logs to the computer successfully, it will show an indication
window as follows:
If there is no data on the RECON-4, it will show an indication window as follows:
3.3 Data Review:
The user can review the data history on the software in the following different ways:
Detector No. (Detector serial number)
Date
Detecting Gas
Record Type
3.3.1 Review data history by Detector No. (Detector serial number):
Check the “Detector No.” box and then below it in the drop down box select the detector serial number that
you want to review.
Then click Review to display the data.