ENMET RECON-4 - Manual (Page 11)

9
3.8 Modify Parameters:
Click the icon for “Modify Parameters” to open the window for modification of parameters.
There are two parts of the “Modify Parameter” window, one part is the “Public Parameter” and another part
is Parameters for each sensor channel.
Note:
Read: Read out present setting.
Setup: Save and setup the modification.
3.8.1 Modify Public Parameters
Please check the box of the item that you want to modify first.
3.8.1.1 Modify Date and Time:
Check the box of the item that you want to change, then input correct data and click Setup.
3.8.1.2 Modify Contrast:
Check the “Contrast” box and then select the contrast of the display that you prefer. Note: that the value
should be between 0 and 20, and then click Setup.