ENMET PPM Formaldemeter™ htV-m - Manual (Page 3)

1.0 Introduction
The PPM Formaldemeter™
htV-m
is a precise 3 parameter indoor air quality monitor suitable for monitoring low level
concentrations of hazardous formaldehyde vapors under extremes of temperature and humidity, in parts per million (ppm) and
mg/m3. Fast and easy to use, pressing a single button gives an immediate indication of concentration levels.
The
htV-m
has a built in non-volatile memory and real time clock. It can be used as a manual hand held device or a continuous
data logger capable of over 7 days (optional) continuous monitoring and thus has the option of being mains or battery powered.
A PC can automate the sampling and logging of data at specific times by a direct USB/RS232 interface or via a wireless
connection. The SPC-2 program can be used to monitor the instrument continuously using the USB/RS232 interface on the
Formaldemeter ™
htV-m
.
Please read these instructions carefully and familiarize yourself with the instrument before use. The operating manual will
provide you with all the necessary information for the correct use of your
Formaldemeter ™
htV-m
.
Please note that PPM Technology Limited shall not be liable for errors that may appear herein or for incidental or consequential
damages in connection with or arising from the use of this material.
N OTE : All specifications stated in this manual may change without notice.
1.1 Unpack
Your PPM Formaldemeter ™
htV-m
kit has been packaged carefully and includes all the components necessary for full
operation. Immediately upon receipt, please examine the kit contents carefully to ensure that you have received the following
items in good condition.
Kit Contents:
• Formaldemeter ™
htV-m
instrument with stand
• Formaldemeter Calibration Standard
•
CD Formaldemeter ™
htV-m
Downloader Software
•
USB Cable
•
AC/DC Adapter with Universal Input Plugs
•
Vial of phenol filters (10)
•
Certificate of Calibration
•
Quick sett-up Guide, and Full Operation Manual
Regarding Damaged Shipments
N OTE : It is your responsibility to follow these instructions. If they are not followed, the carrier will not honor any claims for
damage.
This shipment was carefully inspected, verified and properly packaged at our company and delivered to the carrier in
good condition.
When it was picked up by the carrier at ENMET , it legally became your company’s property.
If your shipment arrives damaged:
•
Keep the items, packing material, and carton “As Is.” Within 5 days of receipt, notify the carrier’s local office and
request immediate inspection of the carton and the contents.
•
After the inspection and after you have received written acknowledgment of the damage from the carrier, contact
ENMET Customer Service for return authorization and further instructions. Have your Purchase Order and Sales
Order numbers available.
ENMET either repairs or replaces damaged equipment and invoices the carrier to the extent of the liability coverage,
usually $100.00. Repair or replacement charges above that value are your company’s responsibility.
The shipping company may offer optional insurance coverage. ENMET only insures shipments with the shipping
company when asked to do so in writing by our customer. If you need your shipments insured, please forward a written
request to
ENMET Customer Service.
Regarding Shortages
If there are any shortages or questions regarding this shipment, please notify ENMET Customer Service within 5 days of
receipt at the following address:
ENMET Corporation
680 Fairfield Court
Ann Arbor, MI 48108
734-761-1270 734-761-3220 Fax