DeLonghi EAM3200 - Manual (Page 17)

• Turned the machine on by pressing the on/off button.
• The green and lights are on steadily (not
flashing).
• Set the coffee flavor, coffee quantity and coffee
grinder (if using coffee beans) dials to the desired
level.
12.1 Preparing Espresso / Coffee
(Using Whole Coffee
Beans)
Note: When using the machine for the first time, 4 to 5
cups of espresso / coffee needs to be made before
the machine delivers satisfying results.
1. Fill the water tank with water and the coffee bean container with
coffee beans, according to the directions listed in
sections 11.1 and 11.3 of the manual.
2. Place one empty cup under the spout to make one
espresso / coffee (Figure 11) or two empty cups for
two espressos / coffees (Figure 12).
Tip: Use cups that have been previously heated by
rinsing them with hot water or by leaving them on the
cup warmer for at least 20 minutes.
Note: For more tips on making coffee hotter, see “Tips
on Making Hotter Coffee” section of the manual.
3. Make sure to lower the adjustable coffee spout if the
cups are small (Figure 13). For larger cups, push the
adjustable coffee spout up to accommodate the size.
4. Press the button (Figure 14) to make one cup of
espresso / coffee or the button (Figure 15) to
make two espressos / coffees.
5. The machine will now grind the beans, run a short
pre-brewing cycle, pause and then complete the
delivery.
Note: While the machine is preparing the espresso /
coffee, the delivery can be terminated at any time
by pressing the button (Figure 14) or the
button (Figure 15), as previously selected.
6. Once the desired quantity is reached, the machine
will automatically terminate espresso / coffee delivery
and discharge the grounds into the used coffee
17
Figure 11
Figure 12
Figure 13
Figure 14
EAM3200_manual_final 5/19/04 11:50 AM Page 17