EarthQuake W2700B - Manual (Page 9)

Operator's Manual
27-Ton Log Splitter, W2700
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST 9
8. Lift the tongue out of the box and attach to the tongue
mounting brackets on the tank using the four bolts, four
nuts, and eight washers found in parts bag labeled #1.
Tighten securely with 19mm wrenches. SEE FIGURE 4.
9. Install the tongue stand onto the tongue and lock into
place in the standing position (not the towing position)
using the locking snap pin.
SEE FIGURE 5.
10. Install the ball hitch receiver onto the end of the tongue
using two 3-inch long bolts, washers, and nuts. Make sure
the safety chains are attached to the forward-most bolt.
Tighten securely with 19mm wrenches. SEE FIGURE 6.
Figure 4
Figure 5
Figure 6
tank
tongue
locking snap pin
tongue
stand
ball hitch receiver
safety chains