Dream Property DM500 + - Manual (Page 46)

46
O = East, W = West (this table is not up to date, it is only for explanation)
U s e r M a n u a l D r e a m b o x D M 5 0 0 english
Take the list of preset satellite positions of your
rotor, which can usually be found in the rotor’s
manual and add each satellite that you want to
receive in the list in the left.
i.e.: Number 1 in the rotor is Hotbird 13° Ost
You will have to enter a 1 in the “Number in rotor”
field and a 130 in the “Orbital position” field.
.
Press the yellow Options-Button to add the
satellite to your list.
An example table of 4 satellites is depicted on the
left.
Attention:
You can later on only scan for services
on satellites that you have entered in this list.
Press the green Options-Button to save your
settings.
The menu “Transponder scan” will show up. See
sections Automatic transponder scan or
Automatic multisat transponder scan for details.
25. Example table for the DiSEqC 1.2 Rotor (SG2100)
For a better understanding please take a look
at the Example table for the DiSEqC 1.2
Rotor (SG2100). It is borrowed fomr the
original manual.