Ditch Witch 250RT - Manual (Page 41)

Service - 40
250R/T Operator’s Manual
Receiver Error Messages
CMW
Receiver Error Messages
Three Dashes
If three dashes appear in the display when
pressing the depth button, one of the following
could be possible:
• The receiver is detecting a signal above it
and cannot estimate depth. This message
is usually caused by interfering signals. Try
relocating target signal.
• Line is too deep for depth estimate. Mark
as hand-dig area.
• Line is too shallow for depth estimate.
Select lowest usable transmitter power
level or lift receiver high enough to return
display to normal operation. Relocate line
and verify with null antenna.
Three Dots
If three dots appear in the display when
pressing the depth button, contact your
equipment dealer.