Ditch Witch SK350 - Manual (Page 41)

Transport - 40
SK350 Operator’s Manual
Haul
CMW
Unload
1. Prepare trailer and ramps for unloading.
2. Remove tiedowns.
3. Disengage parking brake.
4. Start engine.
5. Pull lift arm control to raise mount plate (and attachment) off ground, but keep it low.
6. Adjust throttle to low speed and slowly back unit down trailer or ramps.
Unhitch Trailer
1. Stop tow vehicle and trailer on level ground.
2. Put manual transmission into first or reverse gear or automatic transmission into park. Turn off ignition.
Set parking brake.
3. Block trailer wheels.
4. Reverse “Hitch Trailer” steps on page 37 to unhitch trailer from tow vehicle.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
NOTICE:
• Load and unload trailer on level ground.
• Attach trailer to vehicle before loading or unloading.
NOTICE: If unloading from tilt-bed trailer, be prepared for trailer to tilt.