Ditch Witch SK350 - Manual (Page 33)

Drive - 32
SK350 Operator’s Manual
Start Engine
CMW
Start Engine
1. Ensure all controls are in neutral.
2. If necessary, choke cold engine.
3. Move throttle to half open.
4. Turn ignition switch to start position and release when engine starts.
5. Push in choke after engine is warm.
Drive
General Operation
1. Disengage parking brake.
2. Pull lift arm control to raise mount plate (and attachment) off ground.
3. Move both track drive controls to forward or reverse. See page 20.
4. Adjust throttle as needed.
NOTICE: If jump starting is required, see “Park service vehicle close to disabled equipment but
do not allow vehicles to touch.” on page 65.
EMERGENCY SHUTDOWN: Turn ignition switch to STOP.
IMPORTANT: If needed for attachment operation, push attachment drive foot control to hold
attachment control in the forward position while operating track drive and lift arm controls.