Start unit, Standard procedure, Cold start procedure – Ditch Witch FXT30 User Manual
Page 65: Fx30/fxt30 operator’s manual
Vacuum and Pothole - 64
FX30/FXT30 Operator’s Manual
Start Unit
CMW
®
Start Unit
Standard Procedure
1.
Open tank inlet valve.
2.
If equipped with reverse flow, ensure vacuum is in “vacuum” mode before starting.
3.
Insert key into ignition switch.
4.
Turn key clockwise. See page 29 for more information.
5.
Run engine at low throttle for 5 minutes.
Cold Start Procedure
1.
Open tank inlet valve.
2.
If equipped with reverse flow, ensure vacuum is in “vacuum” mode before starting.
3.
Insert key into ignition switch.
4.
Turn key to on position. Cold start (glow plug) timer indicator will light.
5.
Wait for cold start timer indicator to go off.
6.
Turn key clockwise to start engine.
7.
Run engine at low throttle for 5 minutes.
EMERGENCY SHUTDOWN: Turn ignition switch to STOP.
NOTICE: Avoid idling engine with inlet valve closed.
NOTICE: Avoid idling engine with inlet valve closed.