Fx30/fxt30 operator’s manual – Ditch Witch FXT30 User Manual
Page 111
Service - 110
FX30/FXT30 Operator’s Manual
As Needed
CMW
®
Change Blower Relief Air Filter
Check air filter whenever vacuum gauge goes
over 16” (406 mm) of mercury. Change as
needed.
1.
Remove clamp.
2.
Remove filter and discard.
3.
Install new filter.
4.
Replace clamp.
Empty Cyclonic Separator Canister
Empty cyclonic separator canister (2) as needed.
Open door and dump tank. Clean out cyclone
through upper access door (1) as needed.
NOTICE: Operating system above 16” (406
mm) of mercury may result in blower damage.
IMPORTANT: Depressurize tank before
emptying cyclonic canister, cleaning filter,
clearing hoses or opening any doors.
j33om064h.eps
j33om064h.eps
11
22
j33om065h.eps
j33om065h.eps
This manual is related to the following products: