Ditch Witch JT5 - Manual (Page 125)

Complete the Job - 124
JT5 Operator’s Manual
Rinse Equipment
CMW
Rinse Equipment
Using Optional Washwand
Connect the washwand at quick connect at rear
of unit. Close valve (shown) to shut off flow to
spindle.
Spray water onto equipment to remove dirt and mud. Some pressure might be needed to remove dried
mud from wrench area.
IMPORTANT:
• Never use high flow when using wash
wand.
• Use extreme caution when working with
highly pressurized water.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
NOTICE: Failure to prime the drilling fluid pump will cause flow fluctuations, which will make it difficult to
control the washwand. For instructions, see “Connect Fluid System” on page 109.
Pressurized fluid or air could pierce skin and cause injury
or death. Stay away.
NOTICE: Do not spray water onto operator’s console. Electrical components could be damaged. Wipe
down instead.