Dip switches – DICE Electronics DICE interface for iPod Honda User Manual
Page 19
19
Dip switches
ON
1 2
"iPod Config.
Switch"
"Car Config.
Switch"
DICE Module
ON/OFF Switch Positions
ON
1 2
ON
1
2
OFF
The configuration switches located on the module are used to configure the operation of the interface by the installer.
Incorrect dip switch settings may cause the interface not to work properly or not to operate at all. Disconnect vehicle
harness from module and cycle ignition off for 50 seconds after changing the switches!
This manual is related to the following products: