DaySequerra DownMix User Manual
Page 9
DownMix User Manual
9
Front Panel
Bargraph
Meters
INPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel of
the inbound audio stream.
OUTPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel
of the down mixed audio stream.
Status
Indicators
AES LOCK - Green LED indicator illuminates when DownMix has acquired a valid AES3 digital input
signal.
AES ERROR - Red LED indicator illuminates when DownMix has lost or
receives an invalid AES3 digital input signal.
FAULT - Red LED indicator illuminates when DownMix has discovered a fault.
An error message will be displayed on the display, or fault status may be
viewed under the DIAGNOSTICS menu.
7.1 MODE - Blue LED indicator illuminates when DownMix is operating in 7.1
channel input mode (not supported at this time).
Display and Controls
VACUUM FLUORESCENT DISPLAY - A Multi-function display that indicates current operating status
of the unit and programming menus.
ROTARY ENCODER - A stepping optical rotary encoder is used to select values while in the menu
system. To enter the menu, simply rotate the rotary encoder in any direction while DownMix is on the
HOME screen.
ENTER KEY - Used to enter a menu or confirm a selection. This key will also clear an error message
display from the home screen.
HOME KEY- A press of this button will return DownMix to its home screen, or enter home screen
selection mode.
BACK KEY – A press of this key will return to a previous menu, or if you are entering a value, exit the
field and return the value to the last programmed state.