Meter display – DaySequerra DownMix User Manual

Page 12

Text mode
Original mode

DownMix User Manual

Meter Display

Figure 1. Metering display DownMix.

INPUT LEVELS – LED display shows current amplitude of input signal from
-60dB to 0dB across all active channels. Unused channels will not light the display.

L - Left (AES Input 1)

LFE- Low Frequency (AES Input 4)

R - Right (AES Input 2)

Ls - Left Surround (AES Input 5)

C - Center (AES Input 3)

Rs – Right Surround (AES Input 6)

OUTPUT LEVELS – LED display shows current amplitude of signal generated by DownMix across all
active channels. Unused channels will not light the display.

L - Left (AES Output 1)

LFE- Low Frequency (AES Output 4)

R - Right (AES Output 2)

Ls - Left Surround (AES Output 5)

C - Center (AES Output 3)

Rs – Right Surround (AES Output 6)

Items in italics are used when DownMix is configured to take a 7.1 audio stream and create a 5.1
audio stream (not supported in this code release).