DaySequerra DownMix User Manual
Page 17
DownMix User Manual
17
Alarms
Menu
All alarms are disabled by default at the factory. To take advantage of this function, the desired settings
need to be enabled.
AES Lock: Allows the AES Lock alarm to be suppressed.
PSU Alarm: Allows the Power Supply alarm to be suppressed.
About Menu
Model Number: Displays the model number of the unit.
Serial Number: Displays the serial number of this unit.
Hardware Rev: Displays the hardware revision level of this unit.
Firmware Rev: Displays the firmware revision level that is running on this unit.
DTS Algorithm: Displays the specific DTS algorithm running.
DTS Algorithm Rev: Version of the DTS algorithm running on this unit.
Faults
Although your DownMix will provide you with years of trouble free service, occasionally problems may
occur. Below is a listing of the most common fault conditions.
PSU-x Failed: One of the redundant power supplies has failed and your unit requires service. Please
contact DaySequerra to arrange for repair.
No Sync: AES sync has been lost. Please check the source equipment and all cable connections.
Ensure that DownMix is operating in the proper input mode for your application and is looking for the
source audio on the correct port.
CRC Error: DownMix has encountered a CRC error in the audio stream.
Validity Error: DownMix has encountered a validity error with the audio stream.
Bi-phase Error: DownMix has encountered a bi-phase error with the audio stream.
No Parity Error: DownMix has encountered a parity error with the audio stream.