DaySequerra DownMix - Manual (Page 13)

DownMix
User
Manual
13
Home
Screen
Figure 2. Home Screen on DownMix.
DownMix has been designed with ease of use in mind. Most of the common settings are available for
modification right on the home screen. While the unit is at this screen, press the HOME key to invoke
home screen selection mode; a selection box will appear. Turn the rotary encoder to move the box to
the desired field to be changed and press the ENTER key to modify the value. Rotating the encoder
again will cycle through the available options. Press ENTER again to confirm selection, or BACK to
revert the setting to the last saved value. Pressing the HOME or BACK keys exits home screen
selection mode.
1. Center Mode: Tells DownMix to use a discreet center channel (Hard Center) or mix the center
into the left and right channels (Phantom).
2. Sample Rate: Shows the sample rate DownMix has detected from the clock source. When field
6 is set to INTERNAL, this field may be modified to the desired rate. (1/2, 3/4, 5/6, INT or EXT
SYNC).
3. Input Mode: Defines what kind of signal DownMix is looking for. (Stereo, 5.1, Pass-through)
4. Stereo Output: Defines what physical BNC port DownMix will send the audio output stream to.
(1/2, 3/4, 5/6)
5. Clock Source: Will display the port that DownMix is using for AES Reference timing. This will
be represented as a port number, internal or external.