Clay Paky GLOW UP - Manual (Page 28)

28 GLOW UP
1
2
8
MANUAL ZOOM - ANTENNA
Antenna
NOTES:
To achieve
best wireless perfor-
mance, it is recom-
mended to position
GlowUp with the aerial
side facing the tran-
smitter, when possible.
Manual zoom
- Fig. 8
The GlowUP has a manual zoom located on the back of the projector head.
RDM CONTROLS IMPLEMENTED FOR GLOWUP SERIES
Control PID GET SET Description controller side
DEVICE_INFO 0x0060 X
IDENTIFY_DEVICE 0x1000 X
DMX_START_ADDRESS 0x00F0 X X
SOFTWARE_VERSION_LABEL 0x00C0 X
SUPPORTED_PARAMETERS 0x0050 X
PARAMETER_DESCRIPTION 0x0051 X
DMX_PERSONALITY 0x00E0 X X
DMX_PERSONALITY_DESCRIPTION 0x00E1 X
MANUFACTURER_LABEL 0x0081 X
DEVICE_LABEL 0x0082 X X
SENSOR_DEFINITION 0x0200 X
SENSOR_VALUE 0x0201 X
RECORD_SENSORS 0x0202 X
DEVICE_MODEL_DESCRIPTION 0x0080 X
Gathers information from the device
Makes the red leds on the addressed device pulse
Reads or sets the DMX address
Reads the firmware version
Gathers the PIDS on the non-basic controls
Gathers information on the controls related to the manufacturer
Reads or sets the channel mode
Reads the description of the channel mode
Reads the manufacturer name
Reads or writes a label on the device
Reads the description of the sensors present
Reads the level of the led temperature sensor
Saves the current temperature level
Reads the text description of the model