Digital Data Communications LEVEL ONE FCS-4400 - Manual (Page 81)

78
Alarm Input
When you click Alarm Input on the Advance mode menu, the Alarm output setting menu
appears. You can set in this menu to control the external alarm input of I/O port on the rear of
the camera linked to FTP and SMTP sending function.
Note
： This function is only for Cameras which support digital input/output.
Setting
Sensor input 1： Click it on for using external sensor which is connected to sensor input1 of
the camera I/O port. Select position for moving toward preset position when sensor input 1 be
triggered.
Sensor input 2：
Click it on for using external sensor which is connected to sensor input2 of
the camera I/O port. Select position for moving toward preset position when sensor input 2 be
triggered.
Sensor input 3：
Click it on for using external sensor which is connected to sensor input3 of
the camera I/O port. Select position for moving toward preset position when sensor input 3 be
triggered.
Sensor input 4：
Click it on for using external sensor which is connected to sensor input4 of
the camera I/O port. Select position for moving toward preset position when sensor input 4 be
triggered.