Digital Data Communications LEVEL ONE FCS-4400 User Manual
Page 35
Date/Time
Current date & time：
This displays the current date and time of the camera.
PC clock：
This displays the date and time of the monitoring PC clock.
Adjust：
Select one of four time adjusting modes.
Keep current setting：
Select this mode to keep the current date and time of the camera.
Synchronize with PC：
Select this mode to make the date and time of the camera the same as the
monitoring PC.
Manual setting：
Select this mode to manually adjust the date & time of the camera.
Synchronize with NTP：
Specify the NTP server name and the Refresh Interval to synchronize the date
and time of the camera with those of the time server, known as the NTP (Network Time Protocol) server.
Note:
• The NTP server (Network Time Protocol) is the time server which is an Internet standard protocol
(built on top of TCP/IP) that assures accurate synchronization to the millisecond of computer clock
times in a network of computers.
NTP server name：
Type the host name or IP address of the NTP server, up to 64 characters.
Time zone：
Select the time zone and time difference from Greenwich Mean Time in the area where the
camera is installed from the pulldown box.