Digital Data Communications LEVEL ONE FCS-4400 - Manual (Page 56)

Network
Information
MAC address：Display the MAC address of the device.
Obtain an IP address automatically (DHCP)：If a DHCP server is installed on the network, to select this
while the IP address is assigned by the DHCP server.
Note：
• When you set Obtain an IP address automatically (DHCP), make sure that the DHCP server is working on
the network.
Use the following IP address：Select this when a fixed IP address is set.
IP address：Enter the IP address of the device.
Subnet mask：Enter the subnet mask.
Default gateway：Enter the default gateway.
Use the following DNS server address：Select this when you set the fixed address as the IP address of
DNS server.
Primary DNS server：Enter the IP address of the primary DNS server.
Secondary DNS server：Enter the IP address of the secondary DNS server, if necessary.
HTTP port number：Select 80 in general situations. If you want to use a port number other than 80, select
the text box and enter a port number between 1024 and 65535.
Note ：
• When you have set the HTTP port number to a number other than 80 on the Network setting page or in
the Setup Program, access the device by typing the IP address of the device on the web browser as