Digital Data Communications LEVEL ONE FCS-4400 - Manual (Page 66)

63
Preset Position
In this section, up to 32 Pan / Tilt and Zoom positions can be saved, as well as the home
position, which the camera faces to when the power is turned on.
Setting
Set：
Use it to save the camera position to a preset number.
Carry out the following steps.
1. Move the camera to the position to be saved while you are checking the image with the
main console.
2. Write the preset position name in Preset Pos. Name text box.
3. Click the SET. The camera position is saved.
4. If want to set this position as home position, click Home option on. Click the SET. The
camera position is saved as home position.
Note ：
• Setting the new Home position will replace previous Home position.
Reset：
When writing the preset position name in Preset Pos. Name text box, press Reset to
clean filed words.
Delete All：
Be careful! When pressing Delete All, all Preset Position information will be
deleted.
Delete：
Select a preset number from 1 to 32 in the list box. Use it to delete specific number