Avalue EBM-QM87U - Manual (Page 46)

EBM-QM87U User ’s Manual
46 EBM-QM87U User’s Manual
40 sec
Device power-up delay
Auto[Default]
Manual
Maximum time the device will take before it
properly reports itself to the Host Controller.
‘Auto’ uses default value: for a Root port it is
100ms, for a Hub port the delay is taken form
Hub descriptor.
3.6.2.9 Super IO Configuration
You can use this item to set up or change the Super IO configuration for serial ports. Please
refer to 3.6.2.9.1~3.6.2.9.6 for more information.
Item Description
Serial Port 1 Configuration Set Parameters of Serial Port 1.
Serial Port 2 Configuration Set Parameters of Serial Port 2.
Serial Port 3 Configuration Set Parameters of Serial Port 3.
Serial Port 4 Configuration Set Parameters of Serial Port 4.
Serial Port 5 Configuration Set Parameters of Serial Port 5.
Serial Port 6 Configuration Set Parameters of Serial Port 6.