Austroflamm Yan Xtra - Manual (Page 10)

Yan Xtra / Ray Xtra 8 english
5. SPECIAL FEATURES Yan XTRA / Ray XTRA
Xtra heat storing technology
The models Yan Xtra/Ray Xtra have been equipped with the unique Xtra heat storing technology. This
technology is based on the patented Heat Memory System, but also on the special flue gas guidance and
the convection air which can be regulated or shut off completely. Consequently a fast heating system is
being combined with an extraordinarily efficient heat storing.
The convection air can be regulated according to demand with the attached lever (see picture). The more
the convection air outlets of the top plate are open, the faster heat but less heat storing can be reached. A
closed top plate will however lead to slow heat and longer heat storing.
Konvektionsluftschieber = convection air lever
Our hint: while the fire still burns let the convection air outlets open; close them after the fire has burnt
down in order to reach a steady heat emission.
Operation with external air supply
The German institute for constructional engineering (DIBT) has given the
Yan Xtra the general technical
approval for operation with external air supply. If the combustion air is being supplied directly to the furnace by
an air-tight pipe including closing mechanism from the outside, then the stove may be used in residential
property with mechanical ventilation.
Ray Xtra can be operated with an external air connection. If the combustion air is being supplied directly
to the furnace by an air-tight pipe including closing mechanism from the outside, then the stove may be
used in residential property with mechanical ventilation.
If the stove in being used like that, a multiple stove installation on the same chimney is forbidden.
This stove has been approved by the German DIBT
.