Austin Hughes IPM-01 User Manual

Page 17

www.austin-hughes.com

UM-IPM-01-Q213V2

P.13

Step 2. System setup

In < User > page, the administrator can create max. 5 concurrent login users and set the user name

& password. After this, all users can take the three steps above to access IPM-01.

Step 1. Open Internet Explorer ( I.E. ), version 7.0 or above

Step 2. Enter the IP address of management PC into the address bar

( If fail to access, please ask MIS to check the service port of

the management PC )

Step 3. Enter the user name ( the default is admin )

Enter the password ( the default is 00000000 )

Users can follow below step 1 - 3 to access the management PC and InfraPower Manager IPM-01

Only Administrator is authorised to access < User >, < Setup >, < Alarm >, < Scan >, < Refresh >, < Temp. >, <

Backup > & < SNMP > for initial system setup

Router or hub

Management PC

InfraPower Manager IPM-01