Angelcare AC1120 - Manual (Page 8)

1. Unscrew the bottom of the
nursery Unit and insert 3 AAA
regular alkaline batteries.
2. Connect the AC adapter to
nursery Unit and plug adapter to
an electrical outlet.
3. Turn the Nursery unit ON by
pushing and holding the left
wing for 2 seconds.
ᕡ
ᕢ ᕣ
B. INSTALL THE NURSERY UNIT AND SECURE ALL CORDS
ANGELCARE ® MONITOR INSTALLATION
please refer to setting pages for further details
1. remove the belt clip, unscrew
the back panel and insert the 3
AAA niMh rechargeable batte-
ries included into parents Unit.
2. Connect the AC adapter to the
parents Unit charger and plug
adapter into the electrica outlet.
Charge for a minimum of 10
continuous hours before using
the monitor for the first time.
ᕡ
3. Turn the Parents Unit ON by
pushing and holding the
POWER button for 2 seconds.
4. screen A will appear and then
turn to the video caption B.
when the nursery Unit is off,
screen C will appear and the
parents Unit will automatically
shut off after 1 minute. in this
case, turn on the nursery Unit
and then turn on the parents
Unit again.
ᕣ
POWER
on/off
ᕤ
A. INSTALL THE PARENTS UNIT
ᕢ
A B C
8
AC1120 UK A5 05.15.2012 12-05-15 8:12 AM Page 8