Angelcare AC1120 - Manual (Page 14)

• the antenna icon, displayed on the lCd screen,
indicates the strength of the link to the nursery Unit.
• when the link between the parents Unit and the
nursery Unit is lost, the oUt of rAnge alarm icon
will be displayed on the parents Unit screen.
• on the top bar, the lost linK icon will be displayed.
In case the connection between the Nursery Unit
and the Parents Unit is completely lost, you can
follow these steps to restore the connection.
1. Make sure the parents Unit and the nursery Unit are
turned off.
2. turn the nursery Unit on.
3. press and release the left wing 4 times. the night
light will flash.
4. turn the parents Unit on. A blue screen will appear
with the lost link icon on the top bar.
5. while pressing the talk-back button on the right side
of the parents Unit, press and release the power key
on the parents Unit.
6. A screen for linK is then shown on the parents Unit’s
screen.7.press nursery Unit 1 icon, then press the
“+” and then press the “X”.
8. Video will appear on the parents Unit’s screen,
meaning that the connection was successfully
restored.
good link
low link
lost link
out of range icon
on lCd screen
talk-Back Button power Key
2.6 LINK BETWEEN UNITS
there are 4 built-in infrared leds to display a better image
on the parents unit when there is no sufficient lighting in
the room. when the infrared leds are in use, the image is
shown in black and white on the parents Unit screen.
the Vision mode is always on AUto when you turn the
parents Unit on. press the night Vision icon to scroll
through the 3 available modes.
4 infrared leds
Camera
1. AUTO: the infrared leds are turned on
automatically when the lighting is not
sufficient. the image transition takes
20 seconds.
2. ON: the infrared leds are on at all
times.
3. Off: the infrared leds are off at all
times.
The Moon icon appears when the
infrared LEDS are on.
nursery Unit 1 icon
14
3.1 INfRARED NIGHT VISION
3. ADDITIONAL fUNCTIONS
AC1120 UK A5 05.15.2012 12-05-15 8:12 AM Page 14