AMT Datasouth Accel 7450 - Manual (Page 43)

ACCEL-7450
- 43 -
 This error occurs if the front cover is opened and
causes the ONLINE lamp to blink.
 Closing the front cover clears the error.
 Press the ONLINE key to put the printer back
online (ONLINE lamp on steady).
The jam sensor is defective.

Press the ONLINE key to clear the error.

Press the EJECT/LOAD key to unload paper as
needed.

Make sure the jam sensor on the tractor is clear of
paper pieces and is clean.

Reload fanfold paper.
NOTE: The paper jam sensor may not function
properly if it is exposed to a direct light or
sunlight. Relocate the printer as needed.
COVER OPEN
JAM SENSOR
CAUTION
Never open the front cover during printing.
Press the ONLINE key first to stop printing
and then open the front cover.